Custom Marine Equipment

Machined marine hardware that shrugs off salt water. Cleats, handles, lighting fixtures, deck fittings and one-off pieces, machined in Perth from corrosion resistant metals that belong on the water.

Retractable Shark Cleat
Fish Eye Lighting Fixture
Bronze Figurehead in Bronze

The ocean is the harshest test environment there is. Salt spray, UV, constant vibration and the occasional hard knock will find the weakness in any fitting that wasn’t made properly from the right material. Element Machining produces custom marine parts in Perth for boat builders, shipwrights, chandlers and owners who need hardware that off-the-shelf suppliers simply don’t carry.

Some of what we machine is practical, like cleats, handles, hinges and brackets. Some of it is decorative, like custom lighting fixtures and even figureheads. All of it is machined from corrosion resistant metals and finished to survive a life at sea.

Salt water finds every shortcut. Machine a fitting from the wrong grade and it’ll be streaking rust down the hull before the season’s out. Do it properly and it’ll outlast the boat. I’m a boater and a machinist so I know how to make boat fixtures that last.

Brent Airey, Head Machinist

Marine Parts We Machine

Custom means we’re not working from a catalogue, but the parts that regularly come through the workshop include:

  • Cleats, bollards and fairleads machined to suit your deck layout and line sizes
  • Handles, grab rails and latches for hatches, doors and companionways
  • Lighting fixtures and housings machined to fit your vessel and protect the electronics inside
  • Hinges, brackets and mounts for everything from hatches to electronics arrays
  • Deck fittings and fillers including custom fuel and water deck fills
  • Rudder and steering components machined to tight tolerances
  • Winch, davit and anchor components built for real loads
  • Figureheads and decorative pieces because not everything on a boat has to be purely practical
  • Replacement parts for obsolete hardware reverse engineered from the corroded original

If it bolts, screws or welds to a vessel and you can’t buy it anywhere, that’s exactly the job for us.

Corrosion Resistant Metals

Material selection is where marine work is won or lost. We machine the full range of metals that belong in salt water:

  • 316 stainless steel as the marine workhorse, for cleats, rails, fasteners and fittings that live in constant spray
  • Marine grade aluminium including 5083 and 6061 for lightweight fittings, housings and brackets
  • Bronze for traditional hardware, bearing surfaces and below-waterline fittings
  • Brass for interior hardware and decorative work
  • Duplex and super duplex stainless for demanding commercial and offshore applications
  • Engineered plastics including acetal for sheaves, bushes and fittings that need zero corrosion and low friction

Not sure what your part should be made from? Tell us where it lives on the vessel and what it has to do, and we’ll recommend a grade that suits both the job and the budget. And for aluminium parts, anodising is available within the group for an extra layer of protection and a finish that looks the part.

Work From Your Design or Ours

Have drawings? We’ll machine to them. Send technical drawings or CAD files in STEP, IGES or native formats. Traditional 2D drawings and even a decent sketch with dimensions work too.

Have the old part? Bring it in. Corroded, snapped or worn smooth, we’ll reverse engineer it and machine a new one, often in a better grade than the original.

Starting from an idea? We’ll design it. Through our sister division Element Mechanical Design, we offer in-house design covering geometry, load requirements and material selection. This is especially useful for decorative pieces like figureheads and custom lighting, where the design process matters as much as the machining.

How It Works

  • Send us your requirements. Drawings, CAD files, the corroded original or a photo and a sketch.
  • We quote. Clear pricing and lead time, usually within one business day.
  • Design if needed. For parts without drawings, we design or reverse engineer and confirm the specification with you before machining.
  • We machine and finish. Your parts are machined from the agreed marine grade, finished and inspected.
  • Pick up or delivery. Collect from Malaga or have your order delivered across WA and beyond.

One-Off Parts or Production Runs

One-offs and replacements. A single cleat to match five originals from a 1970s cruiser, a bracket for an unusual electronics install or a figurehead that exists nowhere but in your imagination. One-off custom marine parts are the heart of this service, and we regularly reverse engineer fittings from corroded originals that no chandler has stocked for decades.

Small batches and production runs. Boat builders and marine fabricators come to us for repeat hardware machined to consistent tolerances, batch after batch. Once your part is programmed and proven, reordering is straightforward.

There’s no minimum order quantity. One part is a perfectly good order.

Frequently Asked Questions

What kinds of custom marine parts can you make?

Cleats, bollards, handles, hinges, brackets, lighting fixtures, deck fittings, rudder components, winch parts and decorative pieces including figureheads. If it fits on a vessel and can be machined, we can most likely make it.

What metals do you use for marine parts?

316 stainless steel, marine grade aluminium (5083 and 6061), bronze, brass, duplex stainless and engineered plastics. We’ll recommend the right grade for where the part lives and what it does.

Can you copy a corroded or broken fitting?

Yes. Reverse engineering obsolete marine hardware is one of the most common jobs we see. Bring in what’s left of the original and we’ll measure it up and machine a replacement, often in a more corrosion resistant grade.

Can you really machine a figurehead?

We can. Decorative work is a genuine part of custom marine machining, from figureheads to custom lighting and badge work. Bring us a design or work with our in-house designers to create one.

Do you make parts for commercial vessels as well as recreational boats?

Yes. We machine parts for recreational boats, commercial vessels and workboats alike, including duplex grades for demanding commercial service.

Can you make just one part?

Absolutely. One-off parts are the core of this service and there’s no minimum order quantity.

Do you supply marine parts outside Perth?

Yes. We’re based in Malaga and serve Perth’s marine industry directly, but we deliver custom marine parts across WA and Australia-wide.

Retractable Shark Cleat
Fish Eye Lighting Fixture
Bronze Figurehead in Bronze

Need Custom Marine Parts?

Send us the drawing, the corroded original or just the idea. We’ll come back with a quote and a lead time, usually within one business day.